Technical Specification
| Particulars | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Description | 1270x2 | 1525x2 | 2030x2 | 2540x2 | 3125x2 | 1270x4 | 1525x4 | 2030x4 | 2540x4 | 3125x4 |
| Cutting cap thick of M.S. | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 |
| Cutting cap length | 1270 | 1525 | 2030 | 2540 | 3125 | 1270 | 1525 | 2030 | 2540 | 3125 |
| Depth of Throat | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
| Standard Front Gauge | 900 | 900 | 900 | 900 | 900 | 750 | 750 | 750 | 750 | 750 |
| Standard Rear Gauge | 750 | 750 | 750 | 750 | 750 | 1000 | 1000 | 1000 | 1000 | 1000 |
| Table Height | 850 | 850 | 850 | 850 | 850 | 850 | 850 | 850 | 850 | 850 |
| Table Width | 425 | 425 | 425 | 425 | 425 | 450 | 450 | 450 | 450 | 450 |
| Blade Length | 1270 | 1525 | 2030 | 2540 | 3125 | 1270 | 1525 | 2030 | 2540 | 3125 |
| Blade Width | 50 | 50 | 50 | 50 | 50 | 63 | 63 | 63 | 63 | 63 |
| Blade Thickness | 12 | 12 | 12 | 12 | 12 | 18 | 18 | 18 | 18 | 18 |
| Stroke Per Minute | 60 | 60 | 60 | 50 | 50 | 60 | 60 | 50 | 50 | 50 |
| Hold Down to Knite Edge | 20 | 20 | 20 | 20 | 20 | 25 | 25 | 25 | 25 | 25 |
| Machine Length | 2150 | 2450 | 2900 | 3450 | 4150 | 2300 | 2500 | 3000 | 3550 | 4200 |
| Machine Width | 1450 | 1450 | 1450 | 1450 | 1525 | 1525 | 1525 | 1700 | 1700 | 1850 |
| Machine height | 1275 | 1275 | 1375 | 1375 | 1400 | 1320 | 1320 | 1425 | 1425 | 1500 |
| Main Motor HP / KW | 2/1.5 | 3/2.2 | 5/3.7 | 5/3.7 | 7.5/5.6 | 5/3.7 | 5/3.7 | 7.5/5.6 | 7.5/5.6 | 10/7.5 |
Leave a message