Technical Specification
| Model | M-2B | M-3B | M-4B | M-5B |
|---|---|---|---|---|
| Table | ||||
| Working Table | 1300 x 290 | 1400 x 350 | 1600 x 360 | 1800 x 400 |
| Swivel | ± 45° | ± 45° | ± 45° | ± 45° |
| T Slot Size | 3/17 | 13/14 | 3/17 | 4/17 |
| T-Slot Centre | 65 | 80 | 90 | 80 |
| X-Longitudinal Travel | 650 | 775 | 900 | 1100 |
| Y-Cross Travel | 205 | 255 | 305 | 450 |
| Z-Vertical Travel | 400 | 475 | 550 | 600 |
| Feeds | ||||
| No. of Feeds | 18 | 18 | 18 | 18 |
| Range of Longitudinal Feed/min | 13 to 410 | 13 to 410 | 13 to 410 | 13 to 410 |
| Range of Cross Feed/min | 13 to 410 | 13 to 410 | 13 to 410 | 13 to 410 |
| Range of Vertical Feed/min | 2.5 to 80 | 2.5 to 80 | 2.5 to 80 | 2.5 to 80 |
| No. of Rapid Feeds | 1 | 1 | 1 | 1 |
| Longitudina! Rapid Feeds/min | 1100 | 1100 | 1100 | 1100 |
| Cross Rapid Feeds/min | 1100 | 1100 | 1100 | 1100 |
| Vertical Rapid Feeds/min | 175 | 175 | 175 | 175 |
| Spindle | ||||
| No. of Spindle Speeds | 12 | 12 | 12 | 12 |
| Range of Spindle Speeds (RPM) | 40 to 1150 | 40 to 1150 | 40 to 1150 | 40 to 1150 |
| Spindle Taper | ISO 40 | ISO 40 | ISO 40 | ISO 40 |
| Arbour Diameter | 25.4 | 25.4 | 25.4 | 25.4 |
| Electric | ||||
| Main Motor | 3 HP. | 5 H.-P. | 7.5 H.P. | 7.5 H.P. |
| Feed Motor | 2H.P. | 2H.P. | 3H.P. | 5H.P. |
| Coolant Motor | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. | 0.1 H.P. |
| Dimensions | ||||
| Overall Length | 1850 | 2000 | 2100 | 2500 |
| Overall Width | 1600 | 1750 | 1950 | 2500 |
| Overall Height | 1680 | 1800 | 1880 | 2400 |
| Net Weight Kg. | 2600 | 3300 | 3700 | 4200 |
| Gross Weight Kg. | 2900 | 3600 | 4000 | 4600 |
Leave a message