Geared Head Heavy Duty Lathe Machine

Standard Accessories :-

  • Flame Hardened bed ways
  • Chuck back Plate
  • Center Adaptor
  • Dead Center - 2 Nos.
  • Tool Post Spanner
  • Motor Pulley
  • Three Pin Guide
  • Thread Dia! Indicator
  • Change Gear Set-1 (For metric and inch both) & Norton Gear Box.

Optional Accessories :-

  • Face Plate
  • Extra Chuck Plate
  • Carrier Plate
  • Two Pin Guide
  • Tapper Turning Attachment
  • Motorised Coolant pump with tank & Fittings
  • Rear Tool-Post with Extended Cross slide & Electricals (Motor, Panel board, Wining, Push Button Switch.
  • ‘V‘ belts & fittings)
  • Switch shaft & Chip
  • Guard, Brake Motor.

Technical Specification

Parts Specification HAG-1 HAG-2 HAG-3 HAG-4 HAG-5 HAG-6 HAG-7
Bed Lenght of bed 5 1/2' (1675) 7' (2135) 9' (2745) 10' (3040) 12' (3655) 14' (4270) 16' (4875)
Width of bed 13' (325) 13' (325) 13' (325) 13' (325) 13' (325) 13' (325) 13' (325)
Lenght of Gap 6' (150) 6' (150) 6' (150) 6' (150) 6' (150) 6' (150) 6' (150)
Lenght of bed in front of Face Plate 8" (200) 8" (200) 8" (200) 8" (200) 8" (200) 8" (200) 8" (200)
Capacity Admit Between Center 21' (525) 39' (1000) 63 (1600) 75' (1900) 99 (2500) 123' (3100) 147 (3700)
Movement of cross slide 13' (325) 13' (325) 13' (325) 13' (325) 13' (325) 13' (325) 13' (325)
Movement of Compound slide 5' (125) 5' (125) 5' (125) 5' (125) 5' (125) 5' (125) 5' (125)
Main Spindle Type of Spindle A2-6
Spindle Bore 55 MM
Spindle Morse Taper MT-6
Spindle Adapter Morse Taper MT-4
No. of Speed / RPM Range 12/30, 43, 55, 85, 115, 160, 210, 285, 400, 545, 785, 1060
Tailstock Spindle Diameter 2.25' (57mm)
Morse Taper MT-4
Travel 7' (177)
Threads (For Fully Norton Gear Box) Metric Thread (Total 17) / 0.5 mm to 15 mm Pitch
Inch Thread (Total 40) / 2 TP! to 60 TPI
Lead Screw Dia 1.50' (38mm) x 4 T.P.1
Electric Motor Power 3 H.P/2.25 Kw Ill Phase x 1440 RPM
General Floor Space (mm) 2200 x 1450 2660 x 1450 3140 x 1450 3500 x 1450 4100 x 1450 4720 x 1450 5330 x 1450
Approx Case Dimension(LxWxH) 2400x1300x1600 2850x1300x1600 3350x1300x1600 3700x1300x1600 4300x1300x1600 5000x1300x1600 5550x1300x1600

Specification for Model HAG-1/2/3/4/5/6/7
General Specification For std 10.5’ center height Optional For 12' center height
Height of center 10.5' (267mm) 12' (305mm)
Swing over bed 20.5' (525mm) 23.5’ (600)
Swing over cross slide 12' (300mm) 15' (375)
Swing in gap 32.5' (830mm) 36' (910mm)

2023 Bharat Machinery & Spares. All Rights Reserved. Designed by Arsh Info Systems

Leave a message